Plenty of older Bergen County houses have nothing at all inside the exterior walls. Others have a thin batt that has slumped down the cavity over sixty years, leaving the top third empty. Either way you feel it as a cold wall and a room that will not hold heat.
You do not have to open the walls to fix it. Dense-pack drill-and-fill lets us insulate a finished wall from the outside, cavity by cavity, without touching your interior.
How we do it
How drill-and-fill works
We map the wall cavities, then drill a small access hole into each one — typically from the exterior siding. Through that hole we dense-pack insulation until the cavity is completely full and packed to a density that resists settling.
Then we plug the holes and put the siding back. On most homes the work is invisible once we are done. On some sidings the plugs are faintly visible up close, and we will tell you honestly which category your house falls into before you commit.
Dense-packing matters. Loosely filled cavities settle and leave a gap at the top within a few years, which is exactly the failure we get called to fix. Packing to the right density is the difference between a repair that lasts and one that does not.
Signs you need it
- Exterior walls are noticeably cold to the touch in winter
- Rooms on the windward side of the house are always colder
- Your house was built before wall insulation was standard practice
- You can hear outside noise clearly through exterior walls
- Uneven heating that attic work alone did not solve
What drives the price
- Linear footage of exterior wall and number of stories
- Siding type — how easily it can be opened and reinstated
- Whether cavities are empty or partially filled with settled material
- Obstructions inside the cavities, like fire blocking or old wiring
- Access, scaffolding and site protection
We do not publish price ranges we cannot stand behind. Every house is different — the evaluation is free and the quote is in writing.
Rebates
New Jersey rebates may apply
New Jersey utility programs can cover a meaningful share of insulation and air sealing work. They require a home energy assessment first. We'll tell you which ones fit your house. The federal 25C tax credit ended December 31, 2025 and does not apply to 2026 work.
See current NJ rebatesQuestions
Wall Insulation FAQ
Will you damage my siding?
The work involves opening the siding and putting it back. On vinyl and aluminum this is routine and effectively invisible afterward. On some wood, stucco and masonry finishes the patches can be visible up close. We assess your specific siding at the evaluation and tell you what to expect before you sign anything.
Can you do this from inside instead?
Yes, when exterior access is not practical. It means patching and repainting interior drywall, so we usually prefer the exterior. We will lay out both options with the pros and cons.
What if there is already insulation in the walls?
We check first, usually with a borescope or a thermal scan. If cavities are full and performing, we will tell you that and you will not spend the money. If they are partially settled we can often top them up.
How much difference does it make?
On a house with genuinely empty walls it is dramatic — often the difference between a room you avoid in winter and one you use. On a house with partial fill the gain is real but smaller. We are straight with you about which one you have.